ANTEC PSU SMART POWER-350 ATX12V 350W
|
|
ANTEC PSU SMART POWER-350 ATX12V 350W
|
SP-350
350 Watt ATX12V v2.0 PSU
Features:
- ATX12V version 2.0
- Dual 12V output circuitry provides added system stability and meets 240VA UL requirements and safety purpose: 12V1 for Motherboard and peripherals; 12V2 for processor
- ATX12V v2.0 compliance allows SmartPower 2.0 to consume up to 25% less power than standard power supplies, saving you money on your electric bill. 24-pin power connector with detachable 4-pin section.
- 4 SATA Connectors support Serial ATA drives
- Flow-through dual 80mm fans (one intake and one exhaust)
- Unique Dual Fans Technology: exhaust fan starts to spin when the power supply reaches certain temperatures to ensure proper airflow, the second fan spins on power up
- Industrial grade protection prevents damage resulting from short circuits, power overloads, excessive current, low voltages and excessive voltages
- Increased 12V output capability for system components that consume more power from 12V rail
- PCI-E graphic connector
- Safety approvals: UL, CUL, TUV, CB, FCC Class B, CE, CCC
- Increased MTBF: 80,000 hours
- Size: 5.9" (W) x 3.4" (H) x 6.1"(D)
- PF value greater than 90% (EU only)
- Gold plated connector for superior conductivity
The NEW SmartPower 2.0 is ATX12V v2.0 compliant, with dual+12V rails, 4 serial ATA connectors, and Antec's Unique Dual Fans Design for virtually silent operation. All SmartPower 2.0 power supplies carry UL, CUL, TUV, CB, FCC Class B, CE and CCC certified safety approvals.
|
Model: SP-350
|
|
FEATURES |
| Maximum Power |
350 Watts |
| Switches |
ATX Logic on-off
additional power rocker switch
115/230 Volt selector switch |
| Special Connectors |
ATX12V
3-pin Fan Sensor
SATA |
| Transient Response |
+5V, +12V and 3.3V outputs return to within 5% in less than 1ms for 20% load change. |
| P. G. Signal |
100-500ms |
Over Voltage Protection
recycle AC to reset |
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V | |
|
DIMENSIONS |
| Unit Size |
5.9"(W) x 3.4"(H) x 6.1"(D)
14.9cm (W)x 8.5cm (H) x 15.8cm (D) |
| Net Weight |
5lbs.; 2.3kg | |
| INPUT |
| Input Voltage |
115 VAC/230VAC |
| Input Frequency Range |
47Hz to 63Hz |
| Input Surge Current |
< 60A @ 115VAC/< 80A @ 230V |
| Input Current |
8.0A for 115VAC/5.0A for 230VAC |
| Hold-up Time |
> 17ms at Full Load |
| Efficiency |
> 70% |
| EMI/RFI |
FCC Class B
CISPR22 Class | |
| OUTPUT |
| |
+3.3V |
+5V |
+12V1 |
+12V2 |
+5V SB |
-12V |
| Max. Load |
22A* |
21A* |
10A* |
15A* |
2.0A |
0.3A |
| Min. Load |
0.5A |
0.5A |
1A |
1A |
0A |
0A |
| Load Reg. |
±5% |
±5% |
±5% |
±5% |
±5% |
±5% |
| Ripple V(p-p) |
50mV |
50mV |
120mV |
120mV |
50mV |
120mV |
|
* +5V, +12V1, 12V2 and +3.3V maximum output: 340 Watts max
* +5V and +3.3V combined output: 130Watts | |
| ENVIRONMENTAL |
| Operating Temp. |
0 to 50?C |
| Operating Alt. |
Sea Level 10,000 ft. |
| Non-Operating Vibration |
Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis |
| MTBF |
80,000 hrs. @ 25?C |
| Approvals |
UL, CUL, FCC Class B, CB, T?V | |
|
Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et
generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er
forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som
gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er
uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.